Maintaining accurate and fully operational air compressors directly contributes to your factory's ability to create products to exact specifications. Therefore, if your company's air compressors start malfunctioning, you must promptly track down and repair the problem. Unfortunately, despite its simplicity on the outside, there are a wide range of parts to consider when industrial compressors fail to deliver the right amount of air pressure. Starting with the most common failure points puts you on track to solving the problem in a timely manner.
If you work in a factory that uses programmable logic controllers to run the machinery, you may have come across a problem not being reported by the computer's display. If this is the case, there could be a problem with system's wiring. Use the two-step guide below to help you find and solve the problem.
Step 1: Inspect The AC And DC Inputs And Cables
The first thing you need to do is inspect the AC and DC inputs.
If you work in a factory's machine shop, the plant may have recently purchased a plasma torch for you to use when fabricating parts out of steel. If you are new to using a plasma cutting torch to cut steel sheet metal for fabrication, the following three tips will help prepare you to make your first cut.
Ensure Your Safety Before Starting
As with any project that you are cutting metal with an open flame, safety should be a priority while using a plasma torch.
The bar tap seems like the most unlikely destination for treated wastewater, but that's what a group of craft beer brewers in Oregon have in store. According to The Oregonian, this group will take part in a challenge that highlights how far filtration technology has come in creating drinkable water and creating sustainable environments.
Each day, wastewater treatment facilities throughout the United States reclaim approximately 1 billion gallons of wastewater for use as non-potable water, primarily for agricultural use, aquifer recharging and wildlife wetlands reclamation.
Whether you're a restaurant collecting hundreds of drink cans a day in your trash cans or a steel fabrication firm, you can reclaim a surprising amount of money by recycling your scrap metal. Of course, recycling useful construction and manufacturing waste also helps the environment as well as your bottom line. Improve your workplace's waste management efficiency without stressing your employees by setting up a complete scrap metal reclaiming system.
Talk to Accounting